Smart Citizen Connectivity Unit

Check the BOM to see the components needed.

Enclousure

An ABS IP65 Wall Box is used for these unit. For mounting the components you will need to drill the metal base of the IP65 Wall Box. Use the .dxf file as a template using a 5mm drill and a 6mm drill.

To hold the router, use two 3D printed tubes that you can found here.

They are also needed 2 holes on the top side of the box for the router antennas, using a 6.5mm drill, and 1 hole in the bottom part for the AC wire, using a 20mm drill.